BMR 13 15 Chevrolet Camaro Front & Rear Hollow 29mm Adj. Sway Bar Kit w Bushings Black Hammertone Best 555+ Wonderful Good Morning Images For WhatsApp Mixing Images. The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR's suspensions SB039 front and rear sway bar kit was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy wall 29mm (front) and 32mm (rear) DOM tubing, the SB039 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot formed bars used by many competitors. The sway bar is CNC formed for exact manufacturing tolerances and repeatable high quality. Thrust washers are welded to the bar to locate the sway bar bushing mounts. This is critical as it properly locates the sway bar and prevents lateral movement during hard cornering maneuvers. The sway bar mounts to the car using polyurethane bushings. These bushings are molded from 88 durometer, low deflection, polyurethane, and are internally fluted to keeps grease in the bushing. The steel sway bar mounting brackets are reinforced to minimize deflection. Application Guide This Part Fits: Year Make Model Submodel 2013 2015 Chevrolet Camaro LS 2013 2015 Chevrolet Camaro LT 2013 2015 Chevrolet Camaro SS 2014 2015 Chevrolet Camaro Z 28 2013 2015 Chevrolet Camaro ZL1